Conformable Safety Grip,
is a self adhesive anti slip tape covering for irregular surfaces such as durbar plate, chequer plate and diamond tread often seen in fire exits, walkways, access platforms, etc, providing excellent grip even in wet or dirty conditions. For full length 18m rolls click
here
Specifications
Durbar plate, chequer plate, diamond tread are all commonly used, you can see them almost everywhere for fire exits, walkways, access platforms etc. It is a common misconception that the pattern provides a safe surface to walk on, unfortunately, this is not correct. Durbar plate is an extremely slippery surface, metal does not easily provide a non-slip floor (its hard surface does not attract grip) and the pattern often creates more problems than it solves (the rises result in less surface area for footwear). Many government safety websites warn of the risk of using durbar type plate in critical areas. Conformable Safety-Grip tape is the answer to the problems that irregular metal plates create. Durbar plate was previously impossible to coat with a non slip surface, a conventional non slip tape would rise up when stretched into the valleys.
Conformable anti slip tape is special, it has a class O, very soft aluminium foil backing. The advantage of using a foil instead of a conventional plastic is for the following reasons;
1. Foil has zero stretch tolerances – unlike a plastic it will not be stretched, when a plastic stretches it wants to revert to its original state so will lift from an irregular substrate.
2. The foil has no memory, it can be pressed into place and will remain in that shape.
Key Points
- Aluminium foil backing has no memory so conforms to surfaces
- Immediately reduces the risk of slip accidents
- Self-Adhesive Making It Easy & Quick To Apply
- Can be used indoors and outdoors
- Used for standard applications inc stairs etc
- Cost Effective Anti-Slip Solution
- Easily Cut To Size With Either Scissors Or A Knife
- Excellent Quality Being Manufactured In The UK
- Helps You Meet DDA Regulations & Duty Of Care
- Durable Anti Slip Product
-
- Will adhere to most surfaces
- Available with high-visibility stripes, chevrons, and glow in the dark photo-luminescent lines
- Fits most tiles, steps and stairs
Contact our technical team to discuss your project on 0151 200 9036
FAQs
1. **What is conformable tape, and how is it different from regular tape?**
- Conformable tape is designed to adapt and adhere well to irregular surfaces, such as rough or uneven textures. Unlike regular tape, it offers flexibility and stretchability to conform to various shapes.
2. **What types of surfaces can conformable tape be applied to?**
- Conformable tape is suitable for a wide range of irregular surfaces, including textured walls, uneven substrates, and irregular shapes.
3. **How does conformable tape adapt to irregular shapes and surfaces?**
- Conformable tape typically has a flexible backing material that allows it to conform and adhere to irregularities in the surface.
4. **Is the tape suitable for both indoor and outdoor use on irregular surfaces?**
- Many conformable tapes are designed for both indoor and outdoor use and can withstand various environmental conditions.
5. **Can conformable tape be cut into custom shapes for specific applications?**
- Yes, conformable tape is often easy to cut into custom shapes, allowing for tailored applications.
6. **What is the recommended method for applying conformable tape to irregular surfaces?**
- Ensure the surface is clean, dry, and free of debris. Applying even pressure during installation is usually recommended. what our installation video.
7. **Does the tape leave any residue when removed from irregular surfaces?**
- Conformable tapes are typically designed for clean removal, leaving minimal or no residue behind. However, individual products may vary, so it's essential to check the product specifications.
8. **What is the temperature resistance of conformable tape for irregular surfaces?**
- Conformable tapes generally have good temperature resistance, but the specific temperature range can vary between products. Refer to the product specifications for details.
9. **How long does conformable tape typically adhere to irregular surfaces?**
- The durability of conformable tape depends on factors such as the surface type, environmental conditions, and the specific product.
10. **Can conformable tape be painted over to match the surface colour?**
- Some conformable tapes may be paintable, but it's advisable to check the product specifications for compatibility with paints.
Installation
Installing conformable anti-slip tape on irregular surfaces involves a few key steps to ensure proper adhesion and effectiveness. Here is a general guide on how to install conformable anti-slip tape:
**Materials Needed:**
- Conformable anti-slip tape
- Cleaning solution or isopropyl alcohol
- Clean cloth or rag
- Utility knife or scissors
- Roller or some tool for smoothing out the tape
**Installation Steps:**
1. **Prepare the Surface:**
- Clean the surface thoroughly to remove any dirt, grease, or debris. Use a cleaning solution or isopropyl alcohol and a clean cloth to ensure the surface is completely free of contaminants.
2. **Measure and Cut:**
- Measure the length of the area where you want to apply the anti-slip tape. Cut the tape to the desired length using a utility knife or scissors. If necessary, cut the tape into smaller pieces for easier application.
3. **Peel off the Backing:**
- Carefully peel off the backing from the conformable anti-slip tape, exposing the adhesive side. Be cautious not to touch the adhesive with your fingers to maintain its effectiveness.
4. **Apply the Tape:**
- Align the tape with the starting point on the surface. Press one end of the tape onto the surface and slowly unroll the rest while pressing it down. Ensure that the tape adheres smoothly to the irregularities of the surface.
5. **Smooth Out Air Bubbles:**
- Use a roller or a tool with a flat surface to smooth out the tape, ensuring good contact between the tape and the irregular surface. This step helps eliminate air bubbles and enhances adhesion.
6. **Trim Excess Tape:**
- If there's any excess tape hanging over the edges, use a utility knife or scissors to trim it neatly. This step helps create a clean and finished appearance.
7. **Press Down Firmly:**
- After applying the tape, press down firmly over the entire surface to ensure proper adhesion. This step is crucial for the tape to bond securely with the irregular surface. We recommend using a rubber mallet which promotes consistency in the application process. This consistency is essential for achieving reliable results across the entire surface, especially on irregular or uneven substrates
8. **Allow for Cure Time:**
- Depending on the specific product, allow the conformable anti-slip tape some time to cure and bond with the surface. Follow the manufacturer's recommendations for the appropriate curing or setting time.
**Additional Tips:**
- If the surface is extremely uneven, consider using a primer recommended by the tape manufacturer to enhance adhesion.
- Install the tape in a temperature-controlled environment for optimal results.
Always follow the specific instructions provided by the manufacturer of the conformable anti-slip tape you are using, as product characteristics and application methods may vary.
Additional info
Durbar plate, chequer plate, diamond tread are all commonly used, you can see them almost everywhere for fire exits, walkways, access platforms etc. It is a common misconception that the pattern provides a safe surface to walk on, unfortunately, this is not correct. Durbar plate is an extremely slippy surface, metal does not easily provide a non-slip floor (its hard surface does not attract grip) and the pattern often creates more problems than it solves (the rises result in less surface area for footwear). Many government safety websites warn of the risk of using durbar type plate in critical areas. Conformable Safety-Grip tape is the answer to the problems that irregular metal plates create. Durbar plate was previously impossible to coat with a non slip surface, a conventional non slip tape would rise up when stretched into the valleys.
Conformable anti slip tape is special, it has a class O, very soft aluminium foil backing. The advantage of using a foil instead of a conventional plastic is for the following reasons;
1. Foil has zero stretch tolerances – unlike a plastic it will not be stretched, when a plastic stretches it wants to revert to its original state so will lift from an irregular substrate.
2. The foil has no memory, it can be pressed into place and will remain in that shape.
The upper surface of H3406 Conformable Safety-Grip tape is a conventional abrasive which results in exceptionally high grip levels (coefficient of friction). The abrasive upper surface provides grip even in wet or dirty conditions. The diamond-hard mineral that Slips Away uses (9 on the MOHS scale) ensures that good grip is obtained. Conformable anti slip tape is an extremely popular material. We produce the material in a wide variety of standard widths and shapes and we can easily create almost any width or shape all within extremely accurate tolerances.
One additional benefit of Conformable non slip tape being constructed using a foil instead of a plastic base is that this gives it high flame retardancy levels. Conformable Safety-Grip tape has been tested and certified to CAA FAA specification 8 for use within cockpit areas. For more information please contact our technical sales team.
As always we can produce to any Pantone or RAL colour dependent on quantity.
To order or enquire further, you can contact the Slips Away sales team by phone, Live Chat or the contact us form.
Delivery
DELIVERY
Delivery is FREE of charge and will be posted by DPD Fully tracked delivery on the same day if ordered before 1 pm.
RETURNS & CANCELLATIONS
If you are not satisfied with your purchase or you change your mind, you can request a return or exchange within Twenty-Eight (28) days of purchase if the product is in the original condition and packaging. Original condition means that there are no scratches or marks on the product and the product’s packaging has not been opened, used or damaged and the product is in a re-saleable condition.
To initiate a return, please send an email to info@slipsaway.co.uk with a list of the items that you want to return and the reason you are not satisfied with the product. Detailed instructions for the return will be provided with 48 hours.
You must pay the return postal cost.
