FAQS
General
-
We thoroughly check the quality of our goods, working only with reliable suppliers so that you only receive the best quality product.
-
Free postage on most orders and if you order before 2pm we will ship out the same day. However for large and expensive items there will be a charge meaning you will receive your order in 1-2 days fully tracked
-
We proved a packing slip with your order. Should you need a VAT invoice please contact us at info@slipsaway.co.uk and we will email your invoice
-
Yes. You can purchase Slips Away products in Asda, Morrisons, B&Q, B&M, The Range and many more well established stores.
-
If you decide to cancel or amend an order please contact us through our contact page and we will give a 100% refund back no questions asked.
-
Please email us for details
-
If you decide to cancel or amend an order please contact us through our contact page and we will give a 100% refund back no questions asked.
If you want to return an item please ensure the product is unopened and still in its original packaging due to health and safety reasons.
Bath & Shower Products
-
Slips Away bath stickers are very easy to clean. Just use everyday bath or shower cleaner. You can use a nail brush or scrubber to even give them a good scrub making them look like new. They will not loose colour or loose it texture 100% GUARANTEED
-
If you ever wish to remove non slip bath stickers, you can simply gently peel the stickers off usually by very carefully getting a finger nail or credit card under the edge of each sticker.
-
Yes. Bleach can be used on all our non slip treads & Stickers. Simply use a sponge or cloth to clean your treads and they will come up like new.
-
Bath, shower, or wet room anti-slip stickers are designed for baths,
showers, and wet rooms. Shower trays and baths can be made from enamel
or plastic. To ensure effective adhesion, make sure that the area is
thoroughly cleaned, rinsed, and dried before applying the stickers. If
there is any residue, remove it using the slipsaway degreasing wipe. -
No DIY skills needed, they take just minutes to fit, come with full
instructions and the bath is ready to use immediately. The surface just
needs to be clean and dry. Full instructions are sent with each pack.
Before applying the stickers it is important to clean the bath using an
alcohol based bath cleaner which is provided. -
Feel free to drop us an email, we are always here to help!
Anti-Slip Tape
-
Anti-slip tape has moved forward in recent years, with technology allowing various grades and variants of slip-resistant tape to be produced.
-
The tapes from Slips Away range in width from 25 mm to 610 mm and are typically sold in rolls of 18.3 metres, making them suitable for practically any purpose. We can dispatch the majority of sizes in nine colours as stock products, frequently the very next day. Every anti-slip necessity can actually be met. These tapes come in the following colours from stock and can be used safely indoors or outdoors:
The most typical colour is black. Frequently found in school hallways. Yellow is used to denote warehouses or to highlight specific areas.
According to BS EN ISO 5499 Colours, hazardous locations are designated with yellow/black chevrons.
Clear colour is used in high-end settings where appearance is crucial.
The use of red and white chevrons to indicate prohibition is typically common in locations that require authorisation to access.
Red is used to delineate a space for fire apparatus or to adhere to branding standards. In hospitals or around swimming pools, blue is frequently used.
Grey is used for softening the look of a hallway or pathway. For areas that value aesthetics once more. Brown is used on wooden floors, to match the decor, or to promote a company.
Fire exits, refuge zones, and other areas that need to be kept safe are marked with white (glow-in-the-dark) paint.
Chevrons in white and black that glow in the dark are used to signal safe conditions. frequently used to identify extinguishers, stairways, and final fire exits.
Cleats
These adhesive-backed strips, which are offered in 610x150mm strips and are similar to tapes, come in hazard warning colours and can optionally include the phrases CAUTION or WATCH YOUR STEP. These strips are frequently used to indicate pedestrian-safe paths.
Plates
A variety of bolt-down plates are available from Slips Away for decking and other uneven surfaces. These plates, which measure 365x115mm, are the ideal anti-slip solution for damp, hazardous situations like garden decks, wooden steps, or areas near canals or locks. These licence plates come in black, yellow, or a combination of both colours with a hazard warning chevron.
Stair nose
These bolt-down treads, like the plates, sit at the lip of your staircase to provide a clear path for anyone passing by. In addition, we provide a GRP version that is easily trimmed to fit and has exceptional friction, especially in greasy or damp environments.
Square tiles
A specialty line of tile squares is available from Slips Away. These kits, which come in packs of ten and are available in black, yellow, and clear finishes, can assist ensure safety in shower stalls, kitchens, and other locations with heavy foot traffic and risk. They are also available in SSP's Foot Friendly barefoot anti-slip finishes, which are non-abrasive.
Sealant and Primer
The use of primer and/or sealant may be beneficial for surfaces that are more difficult to maintain or for areas that receive a lot of traffic. The primer from Slips Away is used to treat surfaces that are porous by nature, such as concrete, stone, or wood. This primer enables a more reliable adhesion between the adhesive and the floor.
In order to reduce the danger of damage from moving feet, automobiles, pallets or forklift trucks, sealant offers an extra layer of grip around the edges of tapes and cleats. Before utilising either of these devices, please refer to the installation manuals.
-
This tape is safe for most common outdoor and indoor surfaces, including concrete, stainless steel, metal, wood, tile and laminate flooring. The versatility makes it the ideal choice for not only steps and doorways, but ladder rungs, steps tools and more. We also have conformable tape which has a foil backing and adheres to uneven surfaces like check plate stairs. We also have a range of ancillary equipment to make sure that your anti slip tape stays in place.
-
Our Anti-Slip Tape is suitable for use both indoors and outside.
-
The installation of anti-slip systems is without a doubt its most crucial component. It is relatively simple to produce a solution that is either transient or actively dangerous by taking shortcuts or rushing. Simply adhere to the specified installation sheet to prevent this, or do the following actions;
Before applying the tape, it is recommended to clean, brush, and dry the surface. Any traces of dust, dirt or other impurities could lead to air bubbles in the adhesive, which would shorten its useful life. It might be worthwhile to use a primer if you're putting on wood, concrete, or another porous surface. Even though it may be obvious, installation in the rain is not recommended at all. Why not utilise bolt-down plates for regions that are more problematic?
Without creating any creases or bubbles, apply the tape flat.
Again, air pockets created by wrinkles and bubbles shorten the lifespan of the tape or cleat. To avoid having to reinstall later, it is always worth taking the time to install correctly the first time. The story roller from Slips Away can easily give straight and flat lines to prevent problems like these and guarantee a flat installation. Some surfaces aren't flat by nature, of course. The conformable tape from Slips Away is perfect for certain surfaces, such as chequer plates.
Is sealant required?
It could be a good idea to add a sealer around the borders if the area is likely to experience heavy foot traffic as well as a regular forklift or pallet truck traffic. Despite the fact that the adhesive is very powerful, adding an edge sealant reduces the possibility of the tape being kicked up by wheels or feet, extending its longevity and avoiding a trip hazard.
Allow it to dry
The tape from Slips Away is ready for use after installation. To make sure that the adhesive is properly and uniformly set, it is a good idea to let the tape, strip, or cleat dry (preferably overnight for larger sections).
-
Absolutely. You can improve safety and help prevent slip-and-fall accidents in your home, bathtub, boats, trailers, ramps, docking areas, shower, kitchen, restaurant, hotel or anywhere that may have a slippery surface.
-
Anti-slip tape is clearly a step in the direction of a safe environment, but why should you put it in?
First off, it takes little time or effort to install this tape. This suggests a much more straightforward solution than anti-slip paint, which might call for the closure, emptying, and re-fitting of a warehouse. By only being deployed in troublesome regions, it also reduces waste.
While thermoplastic marking may be preferable in some circumstances, the tape is typically a quicker, less expensive, and less intrusive option. Again, the anti-slip tape can be used without particular training or tools (although our straight line tape marker may come in handy), and without having to halt production, pack, or block off an area until it is safe.
Slips Away's anti-slip tapes can be utilised as a solution for any danger, prohibition, or safe condition area marking due to their affordability and photoluminescence option. This means that employing one item can assist in adhering to a variety of best practices and laws, as well as keeping everyone safe and knowledgeable about risk, which is ultimately the most important component.
On the other hand, Slips Away also carries coloured and transparent tapes, allowing you to include branding into your health and safety routine when aesthetics are crucial. Additionally, we can supply tape to any colour reference (RGB, CMYK, Hex, Pantone), though lead times will inevitably be a little longer.
We offer cut-to-size capabilities in addition to bespoke colours. We have the ability to cut forms, widths, and lengths. One client needed footprint forms, which we were able to deliver fast and for a price that even the sales team was shocked about! Additionally, because we work a lot in print, we can add customised wording to your cleats, strips, and tapes.
-
Slips Away have greatly expanded its selection of anti-slip tapes in recent years. Following the introduction of basic anti-slip tapes in various widths and anti-slip matting, conformable anti-slip strips on a roll and anti-slip treads for use on uneven surfaces like checkerboards have recently been added.
The same coarse, nearly diamond-hard aggregate finish is used in both Slips Away's photoluminescent nonslip tapes and its aluminium-backed anti-slip stair treads for optimal safety.
Our non-abrasive anti slip tapes for use in swimming pools, gyms, and other public spaces make up the last category of this assortment.
All of our anti-slip tapes and anti-slip mats can be ordered within 24 hours.
The anti-slip products available from Slips Away are quite adaptable. There are many locations where the anti slip tapes, cleats, and other items could be used, even though the majority of the materials are ordered for use on stairs.
Sports Centers
Many of Slips Away's current clients have begun employing anti-slip marking to mark their sports halls and courts due to the variety of sizes, styles, and colours. This maintains aesthetics while introducing an additional level of safety. Numerous colours, including white, yellow, and others, are in stock.
Warehouses
A huge warehouse in the West Midlands recently received supplies from Slips Away, including tape, markings, and anti-slip floor signage. This specific client preferred the "belt and braces" method of safety, so to identify bays, he used both anti-slip tape and rough-surface Forklift Truck signs and numbers.
Stairs
The leading authority in stair anti-slip solutions is now Slips Away. We are confident that with our tape rolls, bolt-down strips, or stair nosing, we can assist make your interior or outdoor steps safer.
Wetrooms
Certain moist places in a sauna, shower, gym, recreation centre, or hospital have a high danger of slipping and a large volume of foot traffic from bare feet, frequently that of small children or elderly people. Due to this, Slips Away is now a strong advocate of the Foot Friendly line of non-abrasive anti-slip tape. There is a reduced likelihood of losing footing because of the tape's high coefficient of friction and gentleness toward exposed skin.
Hills
Steep drops and inclines can be very dangerous in your school, yard, or grounds, especially during the winter. It could be advisable to use Slips Away's anti-slip line as a result. It is affordable and easy to install a solution that can minimise the risk of damage to automobiles as well as the risk of accidents for pedestrians using tape, cleats, or bolt-down plates.
Home Care
The bulk of residents at care facilities are older, more fragile individuals who would greatly benefit from the installation of anti-fall measures. A disabled access ramp is useful, but in cold or icy weather, it can become quite unsafe to walk on. Anti-slip tapes can aid in reducing the risk of slips and falls.
Proper Maintenance
Along with the typical red prohibition marking and yellow warning tape, Slips Away also has a variety of glow-in-the-dark (photoluminescent) anti-slip tape. This can lessen the danger of harm both on a daily basis and during frantic fire evacuation circumstances, as well as assist in directing people in an emergency.
Naturally, the demand for anti-slip solutions is as diverse as the options available. The management of an organisation must decide what is necessary. After all, very few people will apply anti-slip tape over the entire floor. Utilising slip-resistant tapes, cleats, and plates can reduce the risk of harm and assist in adhering to the following laws:
HSWA1974 (Health and Safety at Work Act)
Employers have a responsibility to look out for their own health and safety as well as that of others, and they are required to use any specific safety equipment.
Regulations 3 for Management of Health and Safety at Work 1999
Expanding on the aforementioned, it mandates that companies evaluate all risks, including slip, trip, and fall hazards.
Regulation 12 of the Workplace (Health, Safety, and Welfare) Regulations of 1992
Floors must be appropriate, in excellent shape, and free of obstructions, according to this regulation. Safe movement should be possible for everyone.
Visit the HSE website for more information on the aforementioned and how it impacts you.
GRP Decking Strips
-
Installing decking strips, particularly GRP (Glass Reinforced Plastic) decking strips, is a relatively straightforward process. Here's a general step-by-step guide for installing these strips on a wooden deck or other suitable surfaces:
**Materials Needed:**
- GRP decking strips
- Adhesive (if not self-adhesive)
- Measuring tape
- Chalk line or straight edge
- Marker or pencil
- Saw (if cutting strips to size)
- Screwdriver or drill (if using fasteners)
- Safety equipment (gloves, safety glasses)
**Installation Steps:**
1. **Prepare the Surface:**
- Ensure the deck surface is clean, dry, and free from any debris, dust, or oil.
- Repair any damaged or loose boards on the deck before proceeding.
2. **Measure and Plan:**
- Measure the length and width of the area where you want to install the decking strips.
- Plan the layout of the strips, considering spacing between them and any design or pattern you want to create.
3. **Cut Strips (if necessary):**
- If the decking strips are longer than the area you're covering, you may need to cut them to the desired length using a saw.
4. **Apply Adhesive (if applicable):**
- If your GRP decking strips are not self-adhesive, apply a suitable adhesive to the back of each strip. Follow the manufacturer's instructions for the adhesive application.
5. **Position Strips:**
- Carefully place each strip onto the prepared surface, ensuring proper alignment and spacing as planned.
- Press down firmly to ensure good contact between the strip and the deck.
6. **Secure with Fasteners (optional):**
- If your strips are not self-adhesive or if you prefer additional security, you can use screws or nails to secure the strips in place.
- Drill pilot holes through the strips and into the deck, then insert screws or nails.
7. **Check Alignment:**
- Use a straight edge or level to ensure that the strips are properly aligned and level with each other.
8. **Mark and Cut Around Obstacles:**
- If there are any obstacles such as posts or corners, mark the areas on the strips where you need to cut to fit around them.
- Use a saw to carefully cut the strips to the required shape.
9. **Finishing Touches:**
- Once all the strips are installed, double-check their alignment and make any necessary adjustments.
- Clean up any adhesive residue or excess material.
10. **Allow Time to Cure:**
- If you used adhesive, allow sufficient time for it to cure as per the manufacturer's instructions before walking on the strips.
Always follow the specific installation instructions provided by the manufacturer of the GRP decking strips you are using. The installation process may vary based on the type of strips and the surface you are applying them to. Additionally, consider consulting a professional or expert if you're unsure about any aspect of the installation process. -
We offer a standard selection of colors including Black, White, Grey, Green, Beige, Brown, Yellow, and Luminous Yellow. Please note that not all color options are available for all product ranges. Should you have a particular colour in mind, feel free to reach out to us at info@slipsaway.co.uk . We're here to assist you in any way we can.
-
Certainly, we are more than capable of assisting you with that. While there will be a modest fee associated with these services, if you find yourself unable to perform the cutting yourself, we are prepared to handle it on your behalf. Additionally, if you require pre-drilling, we can accommodate that as well.
-
GRP, which stands for Glass Reinforced Plastic or Polymer, is a composite substance formed by blending resin with glass fibers or rovings. Various resin varieties are accessible, each presenting distinct degrees of resistance to fire and chemicals. Further information on this subject is accessible for your perusal here.
-
Absolutely. You can improve safety and help prevent slip-and-fall accidents in your home, bathtub, boats, trailers, ramps, docking areas, shower, kitchen, restaurant, hotel or anywhere that may have a slippery surface.
-
Decking strips are used for several important reasons:
1. **Slip Resistance:** One of the primary benefits of decking strips is their ability to enhance slip resistance on surfaces like decks, ramps, stairs, and walkways. They feature textured surfaces that provide better traction, reducing the risk of slips and falls, especially in wet or slippery conditions.
2. **Safety Enhancement:** Installing decking strips helps create a safer environment, particularly in areas prone to moisture, algae growth, or other hazards. This is especially important in outdoor spaces where people may walk, play, or work.
3. **Durability:** Quality decking strips, often made from materials like GRP (Glass Reinforced Plastic), are designed to withstand heavy foot traffic, weather elements, and regular use. They add an extra layer of protection to your deck, prolonging its lifespan.
4. **Easy Installation:** Decking strips are relatively simple to install, requiring minimal tools and expertise. They can be adhered or fastened to the surface, making them a convenient solution for both DIY enthusiasts and professionals.
5. **Aesthetics:** Decking strips are available in various colors, patterns, and finishes, allowing you to enhance the visual appeal of your deck or outdoor space while maintaining safety. Some strips are even designed to be discreet, blending seamlessly with the existing surface.
6. **Cost-Effective:** Installing decking strips is often more cost-effective than replacing an entire deck surface or using other slip-resistant solutions. They provide a targeted solution to improve safety without major renovations.
7. **Versatility:** Decking strips can be used on various surfaces, including wood, concrete, metal, and composite decking. This versatility makes them suitable for a wide range of applications.
8. **Regulatory Compliance:** In commercial or public spaces, there may be regulations or guidelines in place that require slip-resistant surfaces for safety compliance. Decking strips can help you meet these requirements.
9. **Maintenance:** Properly installed decking strips can reduce the need for frequent cleaning and maintenance of your deck, as they offer protection against wear, tear, and stains.
10. **Quick Solutions:** If you're looking for a quick and effective way to improve the safety of your deck or outdoor area, decking strips provide an immediate solution without the need for extensive renovations.
Overall, using decking strips is a practical and efficient approach to enhancing safety, durability, and aesthetics in outdoor spaces, making them a popular choice for both residential and commercial applications.
GRP Stair nosing & Step covers
-
The installation of GRP nosing strips is a relatively straightforward process that can be done by a professional or a skilled DIY enthusiast. Here are the general steps involved in installing GRP nosing strips on stairs:
Preparation: Start by thoroughly cleaning the stairs to remove any dirt, debris, or existing adhesive. The surface should be clean, dry, and free from any loose or uneven materials.
Measuring and Cutting: Measure the length of the stairs and the width of the nosing strips to determine the correct size for your installation. GRP nosing strips can be cut to size during installation using a fine-toothed saw or a cutting tool suitable for composite materials. Make sure to measure and cut the nosing strips accurately to ensure a proper fit.
Adhesive Application: Apply a suitable adhesive to the back of the GRP nosing strips. It is recommended to use a high-quality adhesive specifically designed for bonding composite materials to ensure a strong and durable bond. Follow the manufacturer's instructions for the application and drying time of the adhesive.
Placement and Alignment: Carefully place the nosing strips on the edge of the stairs, aligning them properly with the step edge. Press down firmly to ensure good adhesion, and use a rubber mallet or a similar tool to tap the nosing strips into place for a snug fit.
Fixing: To provide additional support and stability, you can use screws or fixings to secure the nosing strips to the stairs. This step may not always be necessary, but it can be beneficial, especially for high-traffic areas or if required by local building codes or regulations. Follow the manufacturer's recommendations for fixing methods and spacing.
Finishing: Once the nosing strips are securely in place, you can clean up any excess adhesive and smooth out the edges for a clean finish. If desired, you can also paint or seal the nosing strips to match the aesthetics of your stairs or provide additional protection against weather or wear.
-
Maintenance of GRP Nosing Strips
GRP nosing strips are low-maintenance, but regular care can help prolong their lifespan and ensure optimal performance. Here are some maintenance tips for GRP nosing strips:
Cleaning: Clean the nosing strips regularly with soap and water to remove dirt, debris, or any spills. Avoid using abrasive cleaners or tools that may damage the surface of the nosing strips.
Inspection: Periodically inspect the nosing strips for any signs of wear, damage, or loose edges. If any issues are detected, address them promptly to ensure continued slip resistance and safety.
Repairs: If the nosing strips become damaged or loose, repair or replace them as needed. Follow the manufacturer's recommendations for repair methods or seek professional assistance if necessary.
Re-coating: Over time, the slip-resistant surface of GRP nosing strips may wear off due to foot traffic or exposure to the elements. If needed, you can re-coat the nosing strips with a slip-resistant paint or coating to restore their slip resistance.
-
Installing GRP nosing strips on stairs can offer several benefits, including:
Improved Safety: The primary benefit of GRP nosing strips is enhanced safety on stairs. The slip-resistant surface reduces the risk of slips and falls, providing a secure footing for users, especially in high-traffic areas or outdoor stairs that are exposed to the elements. This can significantly reduce the likelihood of accidents and injuries, making stairs safer for everyone, including children, elderly individuals, and people with disabilities.
Compliance with Building Regulations: Many building codes and regulations mandate the use of slip-resistant nosing strips on stairs to meet safety standards. GRP nosing strips are designed to comply with these regulations and can help ensure that your stairs meet the required safety standards.
Longevity and Low Maintenance: GRP nosing strips are highly durable and require minimal maintenance. They are resistant to wear, weather, and chemicals, making them suitable for long-term use. They do not require painting or sealing, and they are easy to clean with just soap and water, reducing the need for regular maintenance and upkeep.
Versatility: GRP nosing strips can be installed on various types of stairs, including concrete, timber, steel, and composite stairs. They can be used in a wide range of environments, including residential, commercial, industrial, and public settings. They are suitable for both indoor and outdoor use, making them a versatile solution for different applications.
-
Stair Nosing & Contrast Strips can be cut to any length, up to 3
metres. ESP can advise on lengths to allow for expansion and water
egress in external applications.