SafeGrip Anti-Slip Floor Treatment
SafeGrip Anti-Slip Floor Treatment
SafeGrip is a transparent, penetrating anti-slip floor treatment for slippery mineral-based floors and fittings. It reacts with the surface at a microscopic level to create millions of tiny pores, helping improve traction when the floor is wet.
Unlike an anti-slip coating, SafeGrip does not sit on top of the floor. There is no added layer to peel, flake or wear away, and most compatible surfaces retain their original appearance after treatment.
Suitable for homes, commercial premises and public spaces where wet-floor safety is a priority, SafeGrip can be applied with minimal disruption and no overnight curing period.
Key Features
Improves Wet-Floor Grip
SafeGrip micro-etches compatible hard surfaces at a microscopic level to help increase traction underfoot when the floor is wet. It is designed to help reduce slip risk in high-use wet areas without changing the floor profile.
Not a Surface Coating
SafeGrip treats the floor surface itself rather than applying a film over it. There is no coating to crack, peel or flake away over time.
Virtually Invisible Finish
On most compatible surfaces, the original appearance of the floor remains virtually unchanged. Tiles still look like tiles, stone still looks like stone, and there is no visible anti-slip layer.
Minimal Downtime
There is no curing period. Once the treated area has been rinsed and dried, it can usually be walked on within approximately 5–10 minutes, depending on temperature and ventilation.
Very Low Odour
SafeGrip has a very low odour, making it suitable for use in occupied homes, hospitality settings, care environments, schools, retail spaces and public buildings.
Made in the UK
Manufactured in the UK to premium quality standards with full traceability.
Suitable Surfaces
SafeGrip is suitable for many mineral-based hard floor and fitting surfaces, including:
- Ceramic tiles
- Porcelain tiles
- Quarry tiles
- Terrazzo
- Granite
- Most marble surfaces
- Concrete
- Slate
- Enamel
- Vitreous enamel
- Compatible hard floor and wet-area surfaces
Always carry out a small test patch in an inconspicuous area before treating the full floor, particularly on polished stone, marble or specialist finishes.
Not Suitable For
- Wooden floors
- Vinyl flooring
- Linoleum
- Painted surfaces
- Floors with wax, polish, sealant or surface coating still present
- Some polished natural stone surfaces without a successful test patch
Do not apply SafeGrip over floor polish, wax or sealants, as these can prevent the treatment from reacting correctly with the surface and may reduce slip resistance.
Available Sizes
- 250ml
- 500ml
- 1 Litre
- 2.5 Litres
- 5 Litres
Approximate coverage is 15m² per litre, depending on the porosity, texture and condition of the surface being treated.
Product Details
- Product type: Penetrating anti-slip floor treatment
- Finish: Virtually invisible on most compatible surfaces
- Coverage: Approx. 15m² per litre
- Odour: Very low odour
- Application temperature: Minimum 5°C
- Drying time: Typically 5–10 minutes, depending on ventilation and ambient temperature
- Curing time: No curing period required
- Maintenance: Clean as normal; Safe Kleen Multipurpose Cleaner is recommended for ongoing maintenance
- Shelf life: Up to 2 years unopened when stored in the original container between 5°C and 25°C
- Country of manufacture: United Kingdom
Where to Use SafeGrip
Hospitality & Leisure
- Hotel bathrooms and en-suites
- Spas and wet areas
- Restaurant and pub kitchens
- Bar areas and customer washrooms
- Leisure centre changing rooms and shower blocks
- Poolside surrounds
- Gym and fitness facility wet areas
- Holiday park and caravan site amenity blocks
Healthcare & Care Settings
- Care home bathrooms and communal wet rooms
- Hospital ward bathrooms and patient facilities
- GP surgeries and health centre washrooms
- Assisted living and sheltered housing bathrooms
Education & Public Buildings
- School and college washrooms
- Changing rooms and corridors
- University halls of residence bathrooms
- Public swimming pool changing rooms
- Libraries, museums and gallery washrooms
- Local authority buildings and public toilets
Retail & Commercial Premises
- Shopping centre public washrooms
- Retail park facilities
- Supermarket staff areas
- Office kitchens and breakout areas
- Restaurant and café toilets
- Commercial kitchens and food preparation areas
Transport & Infrastructure
- Train station public toilets
- Bus station washrooms
- Airport washroom facilities
- Service station amenity blocks
Residential Applications
- Bathroom tiles
- Shower trays and shower enclosures
- Kitchen floor tiles
- Enamel baths
- Utility rooms
- Conservatory tiled floors
- Patios and pathways
- External tiled steps
- Pool surrounds
- Balcony tiled surfaces
Installation Instructions
Before You Start
- Ensure the floor is clean, dry and free from dirt, grease, oil, wax, polish and existing coatings.
- Use Safe Kleen Multipurpose Cleaner or another suitable degreasing cleaner to prepare the surface thoroughly.
- Rinse the area well and allow it to dry fully before application.
- Protect adjacent surfaces, skirting boards and fittings from accidental contact.
- Ensure the area is adequately ventilated.
- Do not apply below 5°C.
- Always test a small, inconspicuous area first.
Application Method
- Pour SafeGrip into a clean, shallow container or applicator tray.
- Apply evenly using a clean mop, sponge, brush or short-pile paint roller.
- Work in manageable sections of approximately 2–3m² at a time.
- Ensure the full area remains wet with treatment, without allowing excessive puddling.
- Leave the treatment on the surface for approximately 2–5 minutes.
- Do not allow the treatment to dry during the dwell period. Apply a small additional amount if necessary to keep the surface wet.
- Rinse the treated area thoroughly with clean water to remove all residue.
- Remove excess water using a squeegee or wet vacuum, or allow the floor to air dry.
- The floor can usually be walked on once dry, typically within 5–10 minutes.
After Application
- Rinse all application equipment with water immediately after use.
- Clean treated floors as normal using regular cleaning methods.
- Use Safe Kleen Multipurpose Cleaner for best ongoing results.
- Avoid applying waxes, polishes or sealants over the treated surface, as these can reduce the anti-slip effect.
Product Benefits
- Helps improve grip on wet hard floors
- Does not create a visible coating
- No floor height added, helping avoid transition trip hazards
- Suitable for a wide range of compatible mineral-based surfaces
- Fast application with no overnight curing period
- Very low odour for use in occupied buildings
- Easy to maintain with a normal cleaning routine
- Suitable for domestic, commercial and public-sector settings
- Made in the UK
Frequently Asked SafeGrip Questions
What is SafeGrip Anti-Slip Floor Treatment?
SafeGrip is a penetrating treatment designed to improve wet-floor traction on compatible hard surfaces. It works by reacting with the floor at a microscopic level rather than applying a coating over the top.
Is SafeGrip a coating?
No. SafeGrip does not form a surface film. It treats the compatible floor surface itself, so there is no separate layer designed to peel, flake or crack away.
Will SafeGrip change how my floor looks?
Most compatible surfaces retain their original appearance after treatment. There is no visible coating or intentional colour change. Always test a discreet area first, particularly on polished natural stone or specialist finishes.
How long does it take to work?
The treatment works once it has been applied, rinsed and allowed to dry. Floors can usually be walked on within approximately 5–10 minutes after drying.
How long does the treatment last?
SafeGrip is a long-lasting surface treatment rather than a temporary coating. Longevity depends on the floor type, level of foot traffic, cleaning routine and surface condition. Lightly trafficked areas can provide years of performance, while heavily used commercial floors may require re-treatment sooner.
Can I apply SafeGrip myself?
Yes. SafeGrip is designed for straightforward application using basic equipment such as a mop, sponge, brush or roller. Follow the preparation and application instructions carefully, and always complete a test patch before full treatment.
Can SafeGrip be applied while a building is in use?
Yes. Its low odour and lack of curing time make it suitable for treating manageable sections in occupied buildings, subject to appropriate site safety controls and access management.
Will the floor feel rough underfoot?
The treatment works at a microscopic level. On most compatible surfaces, it does not create a noticeably rough or abrasive finish under normal use.
Can SafeGrip be used outdoors?
SafeGrip can be used on compatible external hard surfaces, including patios, paths, steps and pool surrounds. Outdoor surfaces may require more frequent cleaning to prevent dirt build-up.
Please Note
- Always carry out a small test patch before treating the full surface.
- Coverage will vary depending on surface porosity, texture and condition.
- Do not use on wood, vinyl, linoleum, painted surfaces or surfaces with wax, polish or sealant present.
- Do not allow the product to dry on the floor during the application dwell period.
- Product images are for illustration purposes only.
- Follow the product label and safety information before use.
Our Story, Our Promise
"Unbeatable Value, Premium Quality – Forget Shopping Around!
Our commitment to you is simple: exceptional quality at an unbeatable price. Why waste time shopping around when you can find the best deal right here? We promise competitive prices without compromising on the quality you deserve. Shop confidently, knowing you're getting the best without the hassle of endless comparisons. Your savings start right here."
