Anti Slip Stair Tread Covers GRP Heavy Duty BLACK & YELLOW NOSING
Dispatched same day if ordered before 2pm and delivered within 1-2 days subject to quantity and colour.
CHEAPEST PRICE GUARANTEED !!! Anti-slip GRP Stair tread covers are a simple and cost-effective way to provide superior slip resistance on stairways.
They are extremely durable and completely corrosion-resistant so they will never rot or rust.
They have a contrasting nosing for high visibility. Internal and external adhesives are available to complete the installation.
Landing areas are also available utilizing our fibreglass plate. Our non-slip tread covers have a quartz gritted surface and conform to BS7976-2 2002 Slip Resistance Test. The covers and plate have achieved a rating considered to be "Better than excellent”.
Our non-slip stair treads can be used in a range of applications from fire escapes to staircases in large train stations. Main places for use:
- Fire escapes
- Industrial staircases
- Car parks
L 500 x D 345 x H 55
L 750 x D 345 x H 55
L 1000 x D 345 x H 55
The depth or 'GOING' is 345mm from stock. We will cut them to whatever size you require so don't forget to leave a message when checking out.
Tread covers can be cut to any size for you free of charge. They can be fixed down with screws or external grade adhesive. Free drilling if required. Please state during check out if you want free drilling.
***THESE WILL BE NEXT DAY DELIVERY FULLY TRACKED ***
Stair Tread Covers Installation Guide
Before installation make sure the surface is clean, dry and free from any loose material. If you are fixing to concrete steps that are badly worn it may be necessary to effect minor repairs. Installation is improved if the surface is reasonably flat and smooth. Apply adhesive in beads or dabs. See below for estimated adhesive usage.
Set In Position
Set the cover in its final position by simply bedding it in. Apply pressure evenly over the whole tread.
Occasionally you may wish to screw the tread covers down instead of (or as well as) using adhesive. We can pre-drill and countersink your covers free of charge.
Seal the edges to halt excessive moisture ingression with a black silicone sealant. We can supply adhesives for internal and external use. Treads can be walked on after 6 hours.
We can also supply sealants and stainless steel fixings if required.
Our tread covers are supplied cut to size. If you need to trim the covers on site then use a hard metal blade such as a Bosch T141 HM or similar. Landing areas can also be cut to size using larger sheets of gritted plate.
The amount of adhesive you need depends on the size of the cover and also the condition of the surface they are being bonded to. For a general guide, tread covers that are sized at 250mm going and 1000mm wide, one 310ml tube will be needed for every three covers.
Our Story, Our Promise
Our passion for Anti-Slip products means that we provide our customers nothing but the highest quality, cost effective products, with an unwavering focus on your Families Safety.
within 30 days of purchase
Cheapest Prices guaranteed
If you find a cheaper price we will beat it
Our reviews speak for themselves